PB 80 Palazzani PB 80 Specifications & Technical Data (2003—2006)

The Palazzani PB 80 is a backhoe loader manufactured from 2003 to 2006. It has a weight of 8.4 tons and a transport length of 5.81…

The Palazzani PB 80 is a backhoe loader manufactured from 2003 to 2006. It has a weight of 8.4 tons and a transport length of 5.81 meters. The bucket capacity is 1.2 cubic meters. The transport width is 2.2 meters and the transport height is 3.5 meters. It is equipped with special equipment including a clamshell and outrigger stabilizers.

PB 80

Years of manufacture: 2003—2006

Data sheet
Buy & Rent
Valuate & Sell
Spare parts
Transport
News

Technical specs - PB 80 Palazzani

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight: 8.4 t

Standard tyres: 16/70 R24

Bucket capacity: 1.2 m³

Drive: A

Transport length: 5.81 m

Transport width: 2.2 m

Transport height: 3.5 m

Model series: PB

Engine manuf.: Perkins

Engine type: 1104C-E44T

Engine power: 86 kW

More technical details, like: bucket width, bucket capacity backhoe, tear-out force, tear-out force backhoe, max. reach horizontal, dredging depth, max. discharge height, travel speed, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, backhoe type, engine manufacturer, engine model, aspiration, rated speed, engine output - net, engine output - gross, transmission type, number of travel speeds, drive - 2wd / 4wd, service brake type, length - roading, height - over cab, maximum height, width, ground clearance, width - standard shovel, stabiliser type, maximum dig depth - longest dipper, dig depth - sae, reach from slew pivot - non-extending dipper, loading height - non-extending dipper, dump height - general purpose, fuel tank, shovel capacity - standard general purpose, bucket tearout - non-extending dipper, dipper tearout - non-extending dipper, shovel breakout - general purpose, operating weight are available in the full technical specs.

Basic model incl. ROPS cabin, standard shovel, rear with backhoe and standard bucket

Special equipment

Outrigger stabilisers: Yes
Clamshell: Yes
Forklift utility: No
Grabber: No
Diesel particulate filter: No
Aircondition: No

Download datasheets (PDF)

Palazzani PB 80 FAQ

When was the Palazzani PB 80 manufactured?

The Palazzani PB 80 was manufactured from 2003 to 2006.

How much does the Palazzani PB 80 weigh?

The Palazzani PB 80 weighs 8.4 tons.

What are the transport dimensions of the Palazzani PB 80 backhoe loader?

The Palazzani PB 80 has a transport length of 5.81 meters, a transport width of 2.2 meters, and a transport height of 3.5 meters.

What are the undercarriage specifications of the Palazzani PB 80 backhoe loader?

The Palazzani PB 80 backhoe loader has an all-wheel drive system and is equipped with standard tyres sized 16/70 R24.

What is the bucket capacity of the Palazzani PB 80 backhoe loader?

The Palazzani PB 80 backhoe loader has a bucket capacity of 1.2 cubic meters.

How much is a Palazzani PB 80 Backhoe loader (2003u20132006) worth?

The residual value of the Palazzani PB 80 depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Machine inspection

Ask for inspection of your Palazzani PB 80 from experts

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Enquire machine inspection

Provided by:

Buy & Rent

Compare Palazzani PB 80 with similar Backhoe Loaders

Palazzani PB 80

Weight:: 8.4 t

Standard tyres:: 16/70 R24

Bucket capacity:: 1.2 m³

Drive:: A

New Holland 655 D

Weight:: 7.52 t

Standard tyres:: 16.5/85-28

Bucket capacity:: 1 m³

Drive:: H

Hydrema H 906 E-ESD

Weight:: 9.2 t

Standard tyres:: 500/70x28

Bucket capacity:: 1.4 m³

Drive:: A

Terex-Fermec 760

Weight:: 8.2 t

Standard tyres:: 16.9x30

Bucket capacity:: 1 m³

Drive:: A

Fiat-Hitachi FB 100

Weight:: 8.1 t

Standard tyres:: 18.4-26/12.5-80

Bucket capacity:: 1 m³

Do you want to see more detailed comparison?

Show me!

Sell Palazzani PB 80

Backhoe Loaders appraisal with LECTURA Valuation

Whether you need to get value of your Palazzani PB 80 or appraisal of your Backhoe Loaders fleet, LECTURA Valuation will help. Simply fill the form and see the pricing information for Backhoe Loaders in few clicks.

Valuate right now!

Data provided by

Spare parts & Components

Get spare parts for Palazzani PB 80 easily from our partners

Do your lookup for high quality parts for Palazzani PB 80 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Backhoe Loaders spare parts easily today - worldwide.

Get parts for Palazzani PB 80 now!

Transport

Backhoe Loaders Transport & Shipping Services

In case you look into transport options for your machine, take advantage of our services. Enquire the best fitting transport quotes for Backhoe Loaders formed on dimensions and weight. Our partners provide major options and services to satisfy your wishes.

Ask for transport price