480E Case 480E Specifications & Technical Data (1985—1991)

The Case 480E is a backhoe loader manufactured by Case from 1985 to 1991. It has a weight of 2.592 tons and a transport length of …

The Case 480E is a backhoe loader manufactured by Case from 1985 to 1991. It has a weight of 2.592 tons and a transport length of 4.6 meters. The bucket capacity is 0.57 cubic meters, with a tear-out force of 28.202 kilonewtons. It can dredge up to a depth of 4.62 meters and has a bucket width of 1.62 meters. The maximum discharge height is 2.66 meters, and it has a maximum reach horizontal of 6.63 meters. The travel speed of this backhoe loader is 33.7 kilometers per hour. It has a transport width of 2 meters and a transport height of 2.55 meters. Additionally, it is equipped with outrigger stabilizers. The backhoe bucket capacity is 0.05 cubic meters, and it has a tear-out force of 36.102 kilonewtons.

Backhoe Loaders Case 480E

Technical specs - 480E Case

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight
2.592 t
Standard tyres
14.9x24
Bucket width
1.62 m
Bucket capacity
0.57 m³
Bucket capacity backhoe
0.05 m³
Transport length
4.6 m
Transport width
2 m
Transport height
2.55 m
Tear-out force
28.202 kN
Tear-out force backhoe
36.102 kN
Max. Reach horizontal
6.63 m
Dredging depth
4.62 m
Max. discharge height
2.66 m
Travel speed
33.7 km/h
Model series
E
Engine manuf.
Case
Engine type
4-390
Engine power
41.8 kW
Displacement
3.917 l
No. of cylinders
4
Cylinder bore x stroke
102x120 mm

More technical details, like: drive, dimension lxwxh, revolutions at max torque, max. torque, emission level are available in the full technical specs.

Basic model incl. ROPS cabin, standard shovel, rear with backhoe and standard bucket

Special equipment

Outrigger stabilisers
Yes
Clamshell
No
Forklift utility
No
Grabber
No
Diesel particulate filter
No
Aircondition
No

Download datasheets (PDF)

Case 480E FAQ

When was the Case 480E manufactured?

The Case 480E was manufactured from 1985 to 1991.

How much does the Case 480E backhoe loader weigh?

The Case 480E backhoe loader weighs 2.59 tons.

What are the transport dimensions of the Case 480E backhoe loader?

The Case 480E has a transport length of 4.6 meters, a transport width of 2 meters, and a transport height of 2.55 meters.

What is the travel speed of the Case 480E backhoe loader?

The Case 480E backhoe loader has a travel speed of 33.7 km/h.

What are the undercarriage tyre specifications of the Case 480E backhoe loader?

The Case 480E backhoe loader is equipped with standard tyres sized 14.9x24.

What are the excavation performance specifications of the Case 480E backhoe loader?

The Case 480E backhoe loader has a dredging depth of 4.62 meters and a maximum horizontal reach of 6.63 meters.

What are the tear-out forces of the Case 480E backhoe loader?

The Case 480E backhoe loader has a tear-out force of 28.202 kN and a backhoe tear-out force of 36.1 kN.

What is the maximum discharge height of the Case 480E?

The Case 480E has a maximum discharge height of 2.66 meters.

What are the specifications of the primary work tool bucket on the Case 480E backhoe loader?

The Case 480E backhoe loader has a bucket capacity of 0.57 cubic meters, a bucket width of 1.62 meters, and a backhoe bucket capacity of 0.05 cubic meters.

How much is a Case 480E Backhoe loader (1985u20131991) worth?

The residual value of the Case 480E depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Machine inspection

Ask for inspection of your Case 480E from experts

Machine inspection

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Enquire machine inspection

Provided by: Mevas — The Heavy Equipment Inspectors

Buy & Rent

Compare Case 480E with similar Backhoe Loaders

Case 480E

Case 480E

Weight:
2.592 t
Standard tyres:
14.9x24
Bucket width:
1.62 m
Bucket capacity:
0.57 m³
JCB 1 CX

JCB 1 CX

Weight:
2.8 t
Standard tyres:
10x16.5
Bucket capacity:
0.32 m³
Thwaites Alldig

Thwaites Alldig

Weight:
2.6 t
Standard tyres:
6.5/7.5-16
Bucket capacity:
0.25 m³
Venieri 1.33 4 RL

Venieri 1.33 4 RL

Weight:
3.0 t
Standard tyres:
10/75x15.3
Bucket capacity:
0.35 m³

Spare parts & Components

Get spare parts for Case 480E easily from our partners

Spare parts

Do your lookup for high quality parts for Case 480E online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Backhoe Loaders spare parts easily today - worldwide.

Get parts for Case 480E now!

Transport

Backhoe Loaders Transport & Shipping Services

In case you need to transport your machine, apply our services. Seek for the most appropriate transport quotes for Backhoe Loaders based on transport dimensions and weights. Our partners provide large-scale services to satisfy your needs.

Ask for transport price

Data provided by Lectura logo

News

Construction News by LECTURA 14.06.2026

More industry news