Although, MTB breakers need lower power from the excavator, MTB impact energies are higher than many other breakers. This comes from the excellent design of MTB pistons.
MTB Medium Size Hydraulic Breakers
Hydraulic Breakers are chosen according to carrying capacity of the carrier machines. There are designed 5 sort of MTB models with 650 to 1870 kg weight for 7-29 ton class excavator. There are big size excavators are used at the open mine and quarry, and medium size breakers are not used at these applications. Medium Size MTB Breakers are used for trenching, ditching, excavation, demolition, tunnel construction, underwater application and etc. Medium Size MTBs are given high class performance and easy operation with perfect design, high impact energy, low maintenance cost for you.
MTB Demolition Attachments
MTB Demolition Attachments are useful for primary and secondary concrete demolition. There are different designs for demolition applications. There are technical specifications of primary and secondary demolition attachments.
MTB Compactor (CMP Series)
CMP Hydraulic Compactors are mounted on Mini Excavators, Backhoe - Loaders, Excavators and similar Main Machines with hydraulic power unit. Hydraulic compactor compacts by high frequency impact power. This vibration force is used for compaction of soil, granular material, piles, driving of post and sheet sheeting timber. The optional rotation function turns the compactor 360°.
MTB Auger (AGR Series)
For use on skid loaders, tractors, mini excavators, excavators, backhoe - loaders truck cranes and etc. AGR auger driver are an economical, robust solution for drilling holes for fence posts, poles, foundations, and landscaping. Applications specific wear parts and augers mean our auger packages are tailor - made to suit your needs.
Adaptable
A range of drive units with different auger diameters and digging teeth means MTAG is available for all types of excavators, and suitable for a wide variety of applications.
Application
Crusher-CRS
The jaw design is suitable for cutting concrete and reinforced concrete structures as a primary demolition. Behind the jaws, there are steel blades to cut iron bars inside the concrete.
Shear-SHR
Shear is available to cut rebar, iron blocks of steel structures (building, road beams etc.), dismantle the ships for recycling and etc. It allows primary demolition of the steel structures quite, fast and safe.
Wear Parts
All round teeth: made of tempered material, bolt-on teeth are suitable for earth and clay. Strong tungsten teeth: tungsten tipped, suitable for medium - rich soil, stony or frozen ground, heavy clay or asphalt.
Rock Drilling Equipment
Rock Drilling Equipments and Spare Parts are used for fast and reliable drilling application that are produced with latest manufacturing technologies for longlife and best quality. There are many different bit design to suitable all kind of rock and ground conditions. Special material is used for bits body and tungsten carbides on the bit have long wearing life. It allows users fast drilling operation and extended life of bits. We can supply all kind of drilling equipments and spare parts.
Hammer
Renewed Vital Parts
The New Generation MTB's have been developed to increase working life and performance. Some vital parts' design has been modified.
Strong Buffer Support
The buffer system (side, top and bottom buffers) that is used in MTB breakers has special impact and vibration absorbing properties. This protects the breaker and excavator.
Blank Firing Protection
MTB breakers work without touching the piston to cylinder (steel to steel) during blank firing time. Our MTBs have a larger volume oil cushion chamber than other brands, which creates a strong hydraulic suspension. Thus, the MTB breaker can be operated without interruption. Other brands use a stop function or variable stroke control. The "Stop function" works by relief control, where the relief valve opens and closes continuously, causing hydraulic oil to heat up. This warmed oil can cause problems with breaker and excavator components. On the other hand, the "Variable stroke function" is designed with complicated valves on the breaker, which can lead to issues due to the complexity of the parts.
Grease Pump
MTU grease pump design is different from other standard grease pumps. It is driven by the vibration force of the breaker, rather than hydraulic pressure, eliminating the need for any hydraulic connection. It is sufficient to connect the grease line from the pump to the breaker, allowing for easy maintenance and providing adequate force without affecting breaker operation due to the absence of hydraulic connection.
Special Design For Tunneling Application
MTB New Generation "S Series" features a special piston design to increase working life. Superior breaking power and blank firing protection (hydraulic suspension) provide high performance, productivity, and continuous operation without interruption, as there is a non-stop function for blank firing. Additionally, there is an autogreasing system and tool bushing wiper to ensure continuous lubrication and prevent dust from entering inside the breaker.
Underwater Application
MTB Breakers can be used effectively for underwater applications. If water fills the space where the piston strikes the tool, a strong pressure wave occurs, which may damage the breaker. To mitigate this, there is an air line on the breaker that supplies compressed air to the piston impact area, effectively removing water and preventing adverse effects.
Operating cycle
Big Volume Accumulator
Hydraulic Accumulator protects the breaker from peak pressure. The hydraulic accumulator doesn't need gas charging for a long time and recharging at the job site.
Mtb Drifter (DRF Series)
DRF drifter is designed to drill hard rock by hammering, rotating and flushing rock part tides, of which system is consisted of a simple and practical component. Hydraulic drifter is composed of flushing part, rotation device and hammering-device. High drilling speed has been attained by increasing the efficiency of hammering energy, which increases the life of consumables. An automatic pressure regulator is provided to adjust pressure in order to meet the various rock properties. DRF drifter is used for drilling holes for explosion preparations in the mines and for mounting steel construction on the walls of tunnel constructions.
Tools
Thrust Ring/Tool
The thrust ring design has been changed completely. The chisel and thrust ring touching face angle has been changed from 45° to 60° degree. With this design, the touch-face area is much larger than before, providing a significantly longer wearing life. Additionally, the premature area of the tool, designed both before and after recessing, has been removed. This modification could decrease premature breaking of the tool at the retaining area after the excessive tightening limit of the bushing.
Mounting
Strong Housing
Housing material is a special bending type material, that's why it is strong. Also the welds on housing are reduced and no housing bolts are used. This makes the housing more rigid and stronger.
Piston
The stress coming to impact area has been reduced by getting longer impact area. Also it provides impact transfer to chisel with high efficiency.
Front Head
With new front head design, the stress that is coming to the front head and side rod has been reduced. The area between side rod nut and tool pin has more stress during the operation. The stress has been decreased by increasing the distance between side rod nut - tool pin with NG MTBs. The NG MTBs' front head is more stronger than before.
Side Rod
The New Generation MTB's (NG MTB) side rod length is shorter than before and has mono anti-vibration rubber. Old series have two rubbers before; dust and mud stay between the rubbers. It cause stuck the side rod inside the front head. NG MTBs don't have this problem. Short side rod has less stress than longer side rod. It has been decreased 30% the stress that is coming on the side rod by new front head design. The thread of side rod is formed by high technology method instead of machining.
C-Type Housing For Marble Mines
The breakers can be used sometimes like a "ripper". This application is never recommended. Otherwise, housing will be damaged. MTB suggests to avoid to use hammer like a ripper, but for this kind of application, MTB has developed the "C-Type" housing design if it is not possible to avoid. "C-Type" housing has long life and high quality for marble and heavy duty jobs.
Machine inspection
Ask for inspection of your Inan Makina MTB 35 from experts
Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.
Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.
Get spare parts for Inan Makina MTB 35 easily from our partners
Do your lookup for high quality parts for Inan Makina MTB 35 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Hydraulic Breakers spare parts easily today - worldwide.
In case you look into transport options for your machine, take advantage of our services. Check the most appropriate transport quotes for Hydraulic Breakers formed on machine's dimensions and weight. Our partners provide various services to satisfy your wishes.
The heavy equipment market is dynamic and responds flexibly to current technological trends and institutional regulations. Understanding how trends develop over time has become essential for effective decision making. LECTURA GmbH supports professionals through its longitudinal survey services, enabling companies to monitor market developments with greater clarity and confidence.
.png)