DMC210 Daemo DMC210 Specifications & Technical Data (2017—2024)

Features

The newly born alicon Series has innovated with technology, is lighter, stronger, and more powerful than ever. By enlarging the diameter of the T/Bolt, the alicon series has improved its durability. The hose connecting port has been changed from a split flange structure In/Out port to a new adaptor type port. This new port fundamentally reduces possible fail points, such as connected bolt breakage and oil leakage (it applies to all models: B10-B800). Additionally, the box housing has been redesigned with a bending design for more durability. More options include: Anti Blank Firing On/Off Valve, TPC system (2 stages stroke valve), Internal Relief Valve, BPM adjust Valve, Provision Hole for underwater works, and Auto Grease System. The series has diversified into 17 product lines to fit any work conditions. The redesigned chisel pin has improved durability, and more powerful impact power has been applied by enlarging the chisel’s diameter. Furthermore, the life of the breaker (chisel pins, T/Bolts, F/Head, etc.) has been increased by applying the Anti Blank Firing system.

Features

360-degrees directional work ability. Steel structures like H-beams or I-beams can be cut in a single cut. Easier Cutter replacement. Scientific cutting structure and excellent durability. The Speed-up valve can accelerate work speed (option). Link Type mounting bracket. Rotating Type. Loading/unloading timbers, logs and pipes. Wide jaws suitable for various work requirement. High efficiency. Loading/unloading metal scrap, wastes and garbage. Pendulum Type. Rotating Options: Hydraulic Rotating Type, Free Rotating Type, or Fixed Type available. Number of Tines: 4 / 5 / 6. Tines Options: Close type, Semi-close type, Open type. Double safety device for anti-slipping and dropping. Used for making sea breakwater, constructing river drain. Fixed type (Rotating option available).

Fixed Crusher

Enhanced durability with wear-resistant teeth material. Diversified teeth enable fine crushing, which enhances work efficiency. Lower noise, less vibration design enables works in almost any environments. Economical demolition by crushing the concrete and cutting the reinforced steel bars in it for separation purpose. The Speed-up valve can accelerate work speed (option). Option: Tooth replacement type (DMC140~DMC300).

Rotating Crusher

360-degrees directional work ability. Available for separating and cutting steel bars as well as breaking columns. Enabled demolition in narrow building spaces or noise regulated environments with innovative performance. The Speed-up valve can accelerate work speed (option). Option: Tooth replacement type (DMC230R, DMC330R).

Mini Crusher

Dual cylinder system for speedy & powerful operation. Enhanced durability by applying HARDOX. Easy maintenance. Powerful performance with minimum vibration. The Speed-up valve can accelerate work speed (option). Free rotating type (Standard).

Multi Processor

Stronger breaking power maximizes work efficiency. Both crushing concrete and cutting reinforced steel is available by switching Arms. Improved work ability and mobility by adopting hydraulic rotating motor. Durability guaranteed by improved design. Reliability enhanced by Quality Assurance System. The Speed-up valve can accelerate work speed (option).

Multi Processor DMP250Q

Four different Arm replaceable (Crusher, Shear, Demolition, Pulverizer). Replacing Arm can be done within 10 min by applying hydraulic cylinder system. Enhanced safety with Check Valve and mechanical Spring. Tooth replacement available. Enhanced durability by applying Hardox400 & Hardox Hituf. High work efficiency with Speed-up valve as Standard.

Clamshell Bucket

Pendulum Type. Rotating Options: Hydraulic Rotating Type, Free Rotating Type, Fixed Type Available. Teeth can be Installed as Option. Standard Clamshell has no teeth.

Ripper

Specifically designed to pre-rip frozen ground or tough soil that exceeds the bucket’s recommended duty. Used for removing stumps, roots, or rebar. High strength solid shank. Single & Double points type available. Installing adaptor is an option (Standard has no Adaptor).

Material Handler

High strength, low alloy steel yields maximum strength to weight ratio. Large diameter pins and wide joints absorb the strain of big loads. Two pieces Material Handler supplied as standard. A large variety of grapples and clamshell buckets available.