Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Structural and Civil Engineering Equipment Diesel Surface Vibrators Diesel Surface Vibrators weber mt weber mt CF 3/40 specifications

    weber mt CF 3/40 Specifications & Technical Data (2003-2006)

    Rate this machine now!

    Weight: 109kg – Centrifugal force: 18kN – Working width: 400mm – Vibrating frequency: 90Hz – Engine manuf.: Lombardini – Engine type: 15 LD 225

    Technical specs - CF 3/40 weber mt

    Specification

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur.Contact our team with any change suggestion.

    • Weight 109 kg
    • Centrifugal force 18 kN
    • Working width 400 mm
    • Vibrating frequency 90 Hz
    • Engine manuf. Lombardini
    • Engine type 15 LD 225
    • Engine power 3.5 kW
    • Dimension lxwxh ###
    • Displacement ###
    • Revolutions at max torque ###
    • Max. torque ###
    • No. of cylinders ###
    • Cylinder bore x stroke ###
    • Emission level ###

    Special equipment

    • Remote control
    • Extension plates
    • Reverse running
    • Sprinkling equipment
    • Plate slip device
    • Eccentric shaft
    • Electrical starter

    Buy & Rent

    Compare weber mt CF 3/40 with similar Diesel Surface Vibrators

    Press 1 image

    weber mt CF 3/40

    Weight: 109 kg

    Centrifugal force: 18 kN

    Working width: 400 mm

    Vibrating frequency: 90 Hz

    Press 1 image
    Delko SVF 2423

    Weight: 130 kg

    Centrifugal force: 24 kN

    Working width: 480 mm

    Vibrating frequency: 90 Hz

    Press 1 image
    Ammann AVP 2620

    Weight: 130 kg

    Centrifugal force: 24 kN

    Working width: 400 mm

    Vibrating frequency: 95 Hz

    Press 1 image
    Wacker DPS 1850 Y

    Weight: 99 kg

    Centrifugal force: 18 kN

    Working width: 500 mm

    Vibrating frequency: 90 Hz

    Press 1 image
    Atlas Copco LF 100

    Weight: 106 kg

    Centrifugal force: 17 kN

    Working width: 500 mm

    Vibrating frequency: 95 Hz

    Events & News

    Construction News by LECTURA 27.01.2022

    Komatsu selected for development of innovative technologies for outer space autonomous construction managed by the Japanese government
    Komatsu selected for development of innovative technologies for outer space autonomous construction managed by the Japanese government

    Komatsu Ltd. (hereafter “Komatsu”) (President and CEO: Hiroyuki Ogawa) has applied for the request for proposal concerning the Project for Promoting the Development of Innovative Technologies for Outer Space Autonomous Construction...

    More industry news Listen to podcast
    X

    What do you think about this machine?

    weber mt products

    Check out 12 weber mt products here

    More about weber mt