Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Telehandlers Telehandlers Merlo Merlo P 35.13 K specifications

    Merlo P 35.13 K Specifications & Technical Data (2002-2006)

    Rate this machine now!

    Manufactured by Merlo, this is the P 35.13 K telehandler. Find and download detailed specs and data sheets for this machine here. ... Read more

    Manufactured by Merlo, this is the P 35.13 K telehandler. Find and download detailed specs and data sheets for this machine here.

    The Merlo P 35.13 K is a 8.87t machine with Perkins engine which powers this model with up to 62kW or 83 horse power. The Merlo P 35.13 K can be grouped in the medium sized machine segment in the telehandlers category. The measurements of the P 35.13 K are 2.24m x 5.41m x 2.48m. 16/70-20 is the size of standard tyres equipped on this Merlo P 35.13 K telehandler. Operators can travel by 20km/h with this telehandler. Max. Horizontal reach of this P 35.13 K model from Merlo is 8,63m. It can lift 3.5t of nominal load with a 500mm centre of gravity. The Merlo P 35.13 K can lift 2.5t at a full lift height of 13.2m. The capacity of this model at full forward reach is 1t.

    It has been sold without Diesel particulate filter, Side displacement and StVZO Equipment as of 2006. Find detailed specifications and machine details in the original Merlo P 35.13 K datasheet. You can download it for free in German on LECTURA Specs.

    The production stopped in 2006, where this P 35.13 K was available at a new list price between €77,000 and €97,000. For more detailed information about pricing and current residual values, check out the LECTURA Valuation system.

    The P 35.13 K Merlo can be compared to several models from other manufacturers. The closest telehandlers based on specification and pricing are the Manitou MVT 1135 L, Dieci Runner 35.7-93 and Manitou MT 1135 . At present, 56 other telehandlers, which range from 2.7t up to 12t are produced by Merlo. Of these, TF 50.8 T-120, TF 33.7-115 and also TF 50.8 T-CS-156-CVTRONIC are the most frequently visited on LECTURA Specs. Want more detailed specifications? Download the latest Merlo P 35.13 K specs data sheet on LECTURA Specs today!

    Technical specs - P 35.13 K Merlo

    Specification

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    • Nominal load at COG 3.5 t
    • Standard tyres 16/70-20
    • Centre of gravity 500 mm
    • Transmission type Hy
    • Max. Reach horizontal 8,63 m
    • Capacity at full forward reach 1 t
    • Lifting height 13.2 m
    • Capacity at full lift hight 2.5 t
    • Weight 8.87 t
    • Transport length 5.41 m
    • Transport width 2.24 m
    • Transport height 2.48 m
    • Travel speed 20 km/h
    • Engine manuf. Perkins
    • Engine type 1004.42
    • Engine power 62 kW
    • max. climbing ability ###
    • Dimension lxwxh ###
    • Displacement ###
    • Revolutions at max torque ###
    • Max. torque ###
    • No. of cylinders ###
    • Cylinder bore x stroke ###
    • Emission level ###
    • Cab Position ###
    • Chassis Type ###
    • Levelling - Chassis ###
    • Stabilisers ###
    • Drive - 2W / 4W ###
    • Transmission Type ###
    • Engine Manufacturer ###
    • Engine Model ###
    • Aspiration ###
    • Rated Speed ###
    • Engine Output - Gross ###
    • Tyre - Front Size ###
    • Tyre - Rear Size ###
    • Service Brake - Type ###
    • Service Brake - Location ###
    • Length - Front Of Carriage ###
    • Height - Over Cab ###
    • Width - Operating ###
    • Wheelbase ###
    • Ground Clearance ###
    • Width - Cab ###
    • Width - Stabiliser Spread ###
    • Lift Height - Maximum ###
    • Reach - Maximum ###
    • Unstabilised Lift Height - With Maximum Capacity ###
    • Stabilised Lift Height - With Maximum Capacity ###
    • Turning Radius - Over Tyres ###
    • Breakout Force ###
    • Lift Capacity - Maximum ###
    • Lift Capacity - To Max Height ###
    • Lift Capacity - To Max Reach ###
    • Unstabilised Lift Capacity - Maximum ###
    • Unstabilised Lift Capacity - To Max Height ###
    • Unstabilised Lift Capacity - To Max Reach ###
    • Stabilised Lift Capacity - Maximum ###
    • Stabilised Lift Capacity - To Max Height ###
    • Stabilised Lift Capacity - To Max Reach ###
    • Fuel Tank ###
    • Number Of Boom Sections ###
    • Load Centre ###
    • Lift Capacity - Fork Maximum ###
    • Raise Time - Boom ###
    • Extend Time - Boom ###
    • Speed - Forward Maximum ###
    • Operating Weight ###

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

    Special equipment

    • Diesel particulate filter
    • StVZO Equipment
    • Inclination correction
    • Side displacement

    Total Cost of Ownership for 3-4t Telehandlers

    Find out if rental works for you:

    Ownership cost (annual): 16730.79 EUR

    Rental cost (annual): 15521.03 EUR

    You can save 8 % by renting a telehandlers

    *Presented prices are sample calculations.

    Customize the calculation
    service provided by ERA

    Compare Merlo P 35.13 K with similar Telehandlers

    Press 1 image

    Merlo P 35.13 K

    Nominal load at COG: 3.5 t

    Standard tyres: 16/70-20

    Centre of gravity: 500 mm

    Transmission type: Hy

    Press 1 image
    Caterpillar TH 82

    Nominal load at COG: 4 t

    Standard tyres: 15.5-25

    Centre of gravity: 500 mm

    Transmission type: W

    Press 1 image
    Komatsu WH609

    Nominal load at COG: 3.5 t

    Standard tyres: 405/70-24 PR14

    Centre of gravity: 500 mm

    Transmission type: W

    Press 1 image
    Merlo TF 33.9 CS-120

    Nominal load at COG: 3.3 t

    Standard tyres: 405/70 R24 14 PR

    Centre of gravity: 500 mm

    Transmission type: HY

    Press 1 image
    Weidemann T 5625 CX 80

    Nominal load at COG: 4.1 t

    Standard tyres: 12.5/80-20AS

    Centre of gravity: 500 mm

    Transmission type: HY

    Do you want to see more detailed comparison?

    Show me!

    Sell Merlo P 35.13 K

    Telehandlers appraisal with LECTURA Valuation

    Wether you need to get value of your Merlo P 35.13 K or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the machine information and see the values for Telehandlers in few clicks.

    Valuate right now!
    Data provided by

    Spare parts & Components

    Get spare parts for Merlo P 35.13 K easily from our partners

    Inquire the spare part you search for from our partners with a few easy steps and choose the best offer. Wether you are a dealer or end user, LECTURA can lead you to the right direction. Order the Telehandlers spare parts easily today - worldwide.

    RAVAS iForks-32 weight scaling solution for your Merlo P 35.13 K

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Merlo P 35.13 K and realise immediate cost savings

    Functions:

    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system

    Benefits:

    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Events & News

    Material Handling News by LECTURA 20.09.2021

    TOBROCO-GIANT expands dealer network
    TOBROCO-GIANT expands dealer network

    The manufacturer TOBROCO-GIANT from the Netherlands is actually changing its structure for sales and support for Austrian customers.

    More industry news Listen to podcast
    X

    What do you think about this machine?

    Merlo products

    Check out 2 Merlo products here

    More about Merlo