Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Telehandlers Telehandlers JCB JCB 525-60E specifications

    JCB 525-60E Specifications & Technical Data (2021-2021)

    Rate this machine now!

    Nominal load at COG: 2.5t – Standard tyres: 12x16.5 – Centre of gravity: 500mm – Transmission type: W – Capacity at full forward reach: 0.72t – Lifting height: 6m

    Total Cost of Ownership for 3-4t Telehandlers

    BUY (Annual Ownership Cost): 16 730.79 € RENTAL COST (Annual Rental Cost): 15 521.03 €.

    Customize the calculation *Presented prices are sample calculations.

    Provided by

    Technical specs - 525-60E JCB

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 2.5 t
    Standard tyres 12x16.5
    Centre of gravity 500 mm
    Transmission type W
    Capacity at full forward reach 0.72 t
    Lifting height 6 m
    Capacity at full lift hight 2 t
    Weight 5.2 t
    Transport length 3.38 m
    Transport width 1.84 m
    Transport height 1.89 m
    Travel speed 15 km/h
    Engine manuf. Jungheinrich
    Engine type N/A
    Max. Reach horizontal ###
    max. climbing ability ###
    Engine power ###
    Engine power ###
    Dimension lxwxh ###
    Displacement ###
    Revolutions at max torque ###
    Max. torque ###
    No. of cylinders ###
    Cylinder bore x stroke ###
    Weight ###
    Emission level ###

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

    525-60E JCB - Special equipment

    • Diesel particulate filter
    • StVZO Equipment
    • Inclination correction
    • Side displacement

    RAVAS iForks-32 weight scaling solution for your JCB 525-60E

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your JCB 525-60E and realise immediate cost savings

    Functions:

    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system

    Benefits:

    Installation within 5 minutes

    Completely wireless with digital calibration

    More information
    X

    What do you think about this machine?

    Compare JCB 525-60E with other models

    No image available

    JCB 525-60E

    2.5t

    12x16.5

    500 mm

    JCB products

    Check out 28 JCB products here

    More about JCB

    Visit JCB at