Kalmar, part of Cargotec, has been awarded IEC 62443-4-1 certification for its Kalmar One automation system. The system is developed by the Kalmar Technology and Competence Centre in Tampere, Finland.
Faresin Handlers 6.32 telehandler specs (2011 - 2019)
Manufactured by Faresin Handlers, this is the 6.32 telehandler. Find and download detailed specs and data sheets for this machine ... Read more
Manufactured by Faresin Handlers, this is the 6.32 telehandler. Find and download detailed specs and data sheets for this machine here.
This telehandler is built to provide up to 75kW or 100 horse power, delivered from its powerful Deutz engine to the 5.8t 6.32 machine. The Faresin Handlers 6.32 can be grouped in the medium sized machine segment in the telehandlers category. The measurements of the 6.32 are 2m x 4.35m x 2.2m. Standard tyres for this Faresin Handlers 6.32 telehandler have a size of 405/70-20. 40km/h is a maximum speed of which this Faresin Handlers Telehandler can travel. The model's features include a max. Horizontal reach of 3m It can lift 3.2t of nominal load with a 500mm centre of gravity. The 6.32 has a lift height of 5.7m, to which it can lift 2.6t. The capacity of this model at full forward reach is 1.3t.
It has been sold without Side displacement, StVZO Equipment and Diesel particulate filter as of 2018. Take the original Faresin Handlers 6.32 datasheet for even more detailed specifications and machine details. Specification sheet is available for a free download in French, German and Italian - providing the machine descriptions and more detailed specs about this particular model.
Manufacturing of this model is still ongoing.
At present, 17 other telehandlers, which range from 2.5t up to 7t are produced by Faresin Handlers. Of these, 14.35, 7.3 and also 17.4 are the most frequently visited on LECTURA Specs. This 6.32 telehandler, which has been in production between 2011 and 2018 ranks in the LECTURA index at #75. Want more detailed specifications? Download the latest Faresin Handlers 6.32 specs data sheet on LECTURA Specs today!
Technical specs - 6.32 Faresin Handlers
Specification
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur.Contact our team with any change suggestion.
- Nominal load at COG 3.2 t
- Standard tyres 405/70-20
- Centre of gravity 500 mm
- Transmission type HY
- Max. Reach horizontal 3 m
- Capacity at full forward reach 1.3 t
- Lifting height 5.7 m
- Capacity at full lift height 2.6 t
- Weight 5.8 t
- Transport length 4.35 m
- Transport width 2 m
- Transport height 2.2 m
- Travel speed 40 km/h
- Engine manuf. Deutz
- Engine type TCD2012 4M
- Engine power 75 kW
More technical details, like: model series, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque...
Show moreAll specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel
Special equipment
- Diesel particulate filter
- StVZO Equipment
- Inclination correction
- Side displacement
Carbon footprint calculator for Telehandlers
Check out the ERA equipment CO2 Calculator to find out the CO2 footprint per hour of use of the Faresin Handlers 6.32 or other Telehandlers.
The carbon footprint calculation can be carried out based on various biofuel scenarios or other variables.
or go to the ERA Equipment CO2 Calculator to find out how to optimise your carbon footprint.
service provided by
Download datasheets (PDF)
Buy & Rent
Used Faresin Handlers Telehandlers for sale
LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.
Get in touch for more details:
Total Cost of Ownership for 3-4t Telehandlers
Find out if rental works for you:
Ownership cost (annual): 16730.79 EUR
Rental cost (annual): 15521.03 EUR
You can save 8 % by renting a telehandlers
*Presented prices are sample calculations.
Customize the calculation
service provided by
Compare Faresin Handlers 6.32 with similar Telehandlers
Faresin Handlers 6.32
Nominal load at COG: 3.2 t
Standard tyres: 405/70-20
Centre of gravity: 500 mm
Transmission type: HY
.jpg)
New Holland LM 410
Nominal load at COG: 2.8 t
Standard tyres: 17.5 LR 24
Centre of gravity: 500 mm
Transmission type: W
Komatsu WH609
Nominal load at COG: 3.5 t
Standard tyres: 405/70-24 PR14
Centre of gravity: 500 mm
Transmission type: W
Merlo TF 33.9 CS-120
Nominal load at COG: 3.3 t
Standard tyres: 405/70 R24 14 PR
Centre of gravity: 500 mm
Transmission type: HY
DEUTZ-FAHR Agrovector 30.7
Nominal load at COG: 3 t
Standard tyres: 405/70-24
Transmission type: HY
Spare parts & Components
Get spare parts for Faresin Handlers 6.32 easily from our partners
Inquire the spare part you need from our partners with a few easy steps and choose the best offer. Wether you are a dealer or end user, LECTURA can advise you to the right direction. Order the Telehandlers spare parts easily today - worldwide.
Events & News
Material Handling News by LECTURA 25.09.2023
.jpg)
Kalmar becomes first ports and terminals industry solution provider to receive cyber security certification for its automation system for all terminal equipment
X
What do you think about this machine?
Faresin Handlers products
Check out 1 Faresin Handlers products here