Kalmar, part of Cargotec, has been awarded IEC 62443-4-1 certification for its Kalmar One automation system. The system is developed by the Kalmar Technology and Competence Centre in Tampere, Finland.
Faresin Handlers 6.25 telehandler specs (2011 - 2019)
The 6.25 telehandler model is manufactured by Faresin Handlers. Find and download detailed specs and data sheets for this machine ... Read more
The 6.25 telehandler model is manufactured by Faresin Handlers. Find and download detailed specs and data sheets for this machine here.
The Faresin Handlers 6.25 is a 4.5t machine with Yanmar engine which powers this model with up to 52kW or 69 horse power. The Faresin Handlers 6.25 can be grouped in the smallest machine segment in the telehandlers category. The 6.25’s size is 1.655m x 4.4m x 2.135m. 12-16.5 is the size of standard tyres equipped on this Faresin Handlers 6.25 telehandler. 27km/h is a maximum speed of which this Faresin Handlers Telehandler can travel. Max. Horizontal reach of this 6.25 model from Faresin Handlers is 3m. With a center of gravity of 500mm, this model can lift a nominal load of 2.5t. The Faresin Handlers 6.25 can lift 1.7t at a full lift height of 5.7m. The Faresin Handlers 6.25 can operate up to 0.8t at full forward reach.
It does not include Inclination correction, Diesel particulate filter and StVZO Equipment. Take the original Faresin Handlers 6.25 datasheet for even more detailed specifications and machine details. Specification sheet is available for a free download in German, French and Italian - providing the machine descriptions and more detailed specs about this particular model.
Manufacturing of this model is still ongoing.
Faresin Handlers currently produces 17 other telehandlers, which range from 3t up to 7t - the most visited on LECTURA Specs are 17.4, 14.35, 7.3. Ranked in the LECTURA index at #22, this 6.25 telehandler has models that date from 2011 to 2018. Want more detailed specifications? Download the latest Faresin Handlers 6.25 specs data sheet on LECTURA Specs today!
Technical specs - 6.25 Faresin Handlers
Specification
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur.Contact our team with any change suggestion.
- Nominal load at COG 2.5 t
- Standard tyres 12-16.5
- Centre of gravity 500 mm
- Transmission type HY
- Max. Reach horizontal 3 m
- Capacity at full forward reach 0.8 t
- Lifting height 5.7 m
- Capacity at full lift height 1.7 t
- Weight 4.5 t
- Transport length 4.4 m
- Transport width 1.655 m
- Transport height 2.135 m
- Travel speed 27 km/h
- Engine manuf. Yanmar
- Engine type 4TNV98ZDM1
- Engine power 52 kW
More technical details, like: model series, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque...
Show moreAll specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel
Special equipment
- Diesel particulate filter
- StVZO Equipment
- Inclination correction
- Side displacement
Carbon footprint calculator for Telehandlers
Use the ERA equipment CO2 Calculator to find out the CO2 footprint per hour of use of the Faresin Handlers 6.25 or alternative Telehandlers.
The footprint calculation can be carried out considering different biofuel scenarios or other variables.
or go to the ERA Equipment CO2 Calculator to find out how to optimise your CO2 emissions.
service provided by
Download datasheets (PDF)
Buy & Rent
Used Faresin Handlers Telehandlers for sale
LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.
Get in touch for more details:
Total Cost of Ownership for 3-4t Telehandlers
Find out if rental works for you:
Ownership cost (annual): 16730.79 EUR
Rental cost (annual): 15521.03 EUR
You can save 8 % by renting a telehandlers
*Presented prices are sample calculations.
Customize the calculation
service provided by
Compare Faresin Handlers 6.25 with similar Telehandlers
Faresin Handlers 6.25
Nominal load at COG: 2.5 t
Standard tyres: 12-16.5
Centre of gravity: 500 mm
Transmission type: HY
Manitou BT 420
Nominal load at COG: 2 t
Standard tyres: 265/70 R 19/28
Centre of gravity: 500 mm
Transmission type: HY
.jpg)
New Holland LM 410
Nominal load at COG: 2.8 t
Standard tyres: 17.5 LR 24
Centre of gravity: 500 mm
Transmission type: W
.png)
Bobcat T 2556
Nominal load at COG: 2.5 t
Standard tyres: 400/70x20
Centre of gravity: 500 mm
Transmission type: HY
.jpg)
JCB 520-55
Nominal load at COG: 2 t
Standard tyres: 12.5/80-18
Centre of gravity: 500 mm
Transmission type: W
Spare parts & Components
Get spare parts for Faresin Handlers 6.25 easily from our partners
Inquire the spare part you look for from our partners with a few easy steps and choose the best offer. Wether you are a dealer or an owner, LECTURA can navigate you to the right direction. Order the Telehandlers spare parts easily today - worldwide.
Events & News
Material Handling News by LECTURA 25.09.2023
.jpg)
Kalmar becomes first ports and terminals industry solution provider to receive cyber security certification for its automation system for all terminal equipment
X
What do you think about this machine?
Faresin Handlers products
Check out 1 Faresin Handlers products here