Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Telehandlers Telehandlers Case IH Case IH Farmlift 636 specifications

    Case IH Farmlift 636 Specifications & Technical Data (2018-2020)

    Rate this machine now!

    Nominal load at COG: 3.6t – Standard tyres: 460/70 R24 – Centre of gravity: 500mm – Transmission type: W – Max. Reach horizontal: 6.1m – Transport width: 2.34m

    Technical specs - Farmlift 636 Case IH

    Specification

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    • Nominal load at COG 3.6 t
    • Standard tyres 460/70 R24
    • Centre of gravity 500 mm
    • Transmission type W
    • Max. Reach horizontal 6.1 m
    • Transport width 2.34 m
    • Transport height 2.447 m
    • Engine manuf. FPT
    • Engine type k.A.
    • Engine power 96 kW
    • Engine power 129 HP
    • Displacement 4.485 l
    • Revolutions at max torque 2200 rpm
    • Max. torque 591/1500 Nm
    • No. of cylinders 4
    • Emission level Euro IV
    • Capacity at full forward reach ###
    • Lifting height ###
    • Capacity at full lift hight ###
    • Weight ###
    • Transport length ###
    • Travel speed ###
    • max. climbing ability ###
    • Dimension lxwxh ###
    • Cylinder bore x stroke ###
    • Weight ###

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

    Special equipment

    • Diesel particulate filter
    • StVZO Equipment
    • Inclination correction
    • Side displacement

    Total Cost of Ownership for 3-4t Telehandlers

    Find out if rental works for you:

    Ownership cost (annual): 16730.79 EUR

    Rental cost (annual): 15521.03 EUR

    You can save 8 % by renting a telehandlers

    *Presented prices are sample calculations.

    Customize the calculation
    service provided by ERA

    Compare Case IH Farmlift 636 with similar Telehandlers

    Press 1 image

    Case IH Farmlift 636

    Nominal load at COG: 3.6 t

    Standard tyres: 460/70 R24

    Centre of gravity: 500 mm

    Transmission type: W

    Press 1 image
    Caterpillar TH 82

    Nominal load at COG: 4 t

    Standard tyres: 15.5-25

    Centre of gravity: 500 mm

    Transmission type: W

    Press 1 image
    Komatsu WH609

    Nominal load at COG: 3.5 t

    Standard tyres: 405/70-24 PR14

    Centre of gravity: 500 mm

    Transmission type: W

    Press 1 image
    Merlo TF 33.9 CS-120

    Nominal load at COG: 3.3 t

    Standard tyres: 405/70 R24 14 PR

    Centre of gravity: 500 mm

    Transmission type: HY

    Press 1 image
    Weidemann T 5625 CX 80

    Nominal load at COG: 4.1 t

    Standard tyres: 12.5/80-20AS

    Centre of gravity: 500 mm

    Transmission type: HY

    Spare parts & Components

    Get spare parts for Case IH Farmlift 636 easily from our partners

    Inquire the spare part you look for from our partners with a few easy steps and choose the best offer. Wether you are a dealer or an operator, LECTURA can guide you to the right direction. Order the Telehandlers spare parts easily today - worldwide.

    RAVAS iForks-32 weight scaling solution for your Case IH Farmlift 636

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Case IH Farmlift 636 and realise immediate cost savings

    Functions:

    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system

    Benefits:

    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Events & News

    Material Handling News by LECTURA 27.07.2021

    Terex Utilities Introduces Foundation High Production Auger at IFCEE
    Terex Utilities Introduces Foundation High Production Auger at IFCEE

    Drilling and foundations contractors will see new auger tools from Terex Utilities at the International Foundations Congress & Equipment Expo, May 10-14, 2021 in Dallas, Texas.

    More industry news Listen to podcast
    X

    What do you think about this machine?

    Case IH products

    Check out 11 Case IH products here

    More about Case IH