Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Rough Terrain Forklifts Rough Terrain Forklifts TCM TCM FD100-3H specifications

    TCM FD100-3H Specifications & Technical Data (2021-2021)

    Rate this machine now!

    Nominal load at COG: 10t – Centre of gravity: 600mm – Weight: 13.25t – Total width: 2.24m – Construction height: 2.895m – Lifting height: 3m

    Technical specs - FD100-3H TCM

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 10 t
    Centre of gravity 600 mm
    Weight 13.25 t
    Total width 2.24 m
    Construction height 2.895 m
    Lifting height 3 m
    max. climbing ability 47 %
    Engine manuf. Isuzu
    Engine type 6BG1T
    Engine power 114 kW
    Engine power 155 HP
    Displacement 6.494 l
    Revolutions at max torque 1800 rpm
    Max. torque 537 Nm
    Emission level Tier 2
    Standard tyres ###
    Transmission type ###
    Travel speed with / without load ###
    Hoisting with / without load ###
    Lowering with load ###
    Dimension lxwxh ###
    No. of cylinders ###
    Cylinder bore x stroke ###
    Weight ###

    L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

    FD100-3H TCM - Special equipment

    • StVZO Equipment

    RAVAS iForks-32 weight scaling solution for your TCM FD100-3H

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your TCM FD100-3H and realise immediate cost savings

    Functions:

    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system

    Benefits:

    Installation within 5 minutes

    Completely wireless with digital calibration

    More information
    X

    What do you think about this machine?

    Compare TCM FD100-3H with other models

    No image available

    TCM FD100-3H

    10t

    600 mm

    13.25 t

    TCM products

    Check out 14 TCM products here

    More about TCM