Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Rotor Telehandler Rotor Telehandler Manitou Manitou MRT 2550 specifications

    Technical specs - MRT 2550 Manitou

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 4.999 t
    Standard tyres 445/65 R 22.5
    Centre of gravity 500 mm
    Transmission type HY
    Max. Reach horizontal 1.5 m
    Capacity at full forward reach 0.33 t
    Lifting height 24.7 m
    Capacity at full lift hight 0.35 t
    Weight 18.9 t
    Transport length 9.035 m
    Transport width 2.49 m
    Transport height 3.05 m
    Travel speed 40 km/h
    Engine manuf. Mercedes-Benz
    Engine type OM934 E 4-5
    Engine power 115 kW
    Displacement 5.13 l
    Revolutions at max torque 1500 rpm
    Max. torque 675 Nm
    No. of cylinders 4
    Emission level Tier 4 f
    max. climbing ability ###
    Engine power ###
    Dimension lxwxh ###
    Cylinder bore x stroke ###
    Weight ###
    Cab Position ###
    Chassis Type ###
    Stabilisers ###
    Drive - 2W / 4W ###
    Transmission Type ###
    Telematics Available ###
    Platform ###
    Engine Manufacturer ###
    Engine Model ###
    Emission Rating ###
    Aspiration ###
    Engine Output - Gross ###
    Torque ###
    Transmission Control ###
    Steering Type ###
    Length - Front Of Carriage ###
    Height - Over Cab ###
    Width - Operating ###
    Wheelbase ###
    Ground Clearance ###
    Width - Cab ###
    Width - Stabiliser Spread ###
    Lift Height - Maximum ###
    Lift Height - With Maximum Capacity ###
    Reach - Maximum ###
    Reach - At Maximum Lift Height ###
    Reach - Ground With Maximum Capacity ###
    Carriage Rotation Angle ###
    Unstabilised Lift Height - With Maximum Capacity ###
    Stabilised Lift Height - With Maximum Capacity ###
    Turning Radius - Over Tyres ###
    Turning Radius - Over Forks ###
    Lift Capacity - Maximum ###
    Lift Capacity - To Max Height ###
    Lift Capacity - To Max Reach ###
    Unstabilised Lift Capacity - To Max Height ###
    Unstabilised Lift Capacity - To Max Reach ###
    Stabilised Lift Capacity - To Max Height ###
    Stabilised Lift Capacity - To Max Reach ###
    Fuel Tank ###
    Diesel Exhaust Fluid ###
    Number Of Boom Sections ###
    Load Centre ###
    Lift Capacity - Fork Maximum ###
    Speed - Forward Maximum ###
    Operating Weight ###

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

    MRT 2550 Manitou - Special equipment

    • Diesel particulate filter
    • limited pivotable
    • endles rotation

    RAVAS iForks-32 weight scaling solution for your Manitou MRT 2550

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Manitou MRT 2550 and realise immediate cost savings

    Functions:

    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system

    Benefits:

    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Download data sheets - Manitou MRT 2550

    X

    What do you think about this machine?


    Compare Manitou MRT 2550 with other models

    Press 1 image

    Manitou MRT 2550

    4.999t

    445/65 R 22.5

    500 mm

    Manitou products

    Check out 21 Manitou products here

    More about Manitou

    Material Handling News by LECTURA 02.12.2020

    On site in Shanghai: bauma CHINA gives confidence and hope to the entire industry
    On site in Shanghai: bauma CHINA gives confidence and hope to the entire industry

    After four show days, bauma CHINA 2020 ended on November 27. Despite the COVID-19 crisis and the latest travel restrictions, this year’s exhibition attracted 2,867 exhibitors and around 80,000 high-quality trade visitors.

    More industry news