Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Rotor Telehandler Rotor Telehandler Dieci Dieci Pegasus 50.19 specifications

    Technical specs - Pegasus 50.19 Dieci

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 5 t
    Standard tyres 18 R 22.5
    Centre of gravity 500 mm
    Transmission type HY
    Max. Reach horizontal 16.4 m
    Capacity at full forward reach 0.6 t
    Lifting height 18.7 m
    Capacity at full lift hight 3 t
    Weight 16.5 t
    Transport length 6.76 m
    Transport width 2.38 m
    Transport height 3.025 m
    Travel speed 40 km/h
    max. climbing ability 40 %
    Engine manuf. FPT
    Engine type NEF-4 CR
    Engine power 104 kW
    Displacement 4.485 l
    Revolutions at max torque 1600 rpm
    Max. torque 608 Nm
    No. of cylinders 4
    Emission level IIIA/Tier 3
    Engine power ###
    Dimension lxwxh ###
    Cylinder bore x stroke ###
    Weight ###
    Cab Position ###
    Chassis Type ###
    Levelling - Chassis ###
    Stabilisers ###
    Drive - 2W / 4W ###
    Transmission Type ###
    Telematics Available ###
    Engine Manufacturer ###
    Aspiration ###
    Engine Output - Gross ###
    Steering Type ###
    Service Brake - Type ###
    Service Brake - Location ###
    Length - Front Of Carriage ###
    Height - Over Cab ###
    Width - Operating ###
    Wheelbase ###
    Ground Clearance ###
    Width - Cab ###
    Width - Stabiliser Spread ###
    Lift Height - Maximum ###
    Lift Height - With Maximum Capacity ###
    Reach - Maximum ###
    Reach - At Maximum Lift Height ###
    Reach - Ground With Maximum Capacity ###
    Carriage Rotation Angle ###
    Unstabilised Lift Height - With Maximum Capacity ###
    Stabilised Lift Height - With Maximum Capacity ###
    Turning Radius - Over Tyres ###
    Lift Capacity - Maximum ###
    Lift Capacity - To Max Height ###
    Lift Capacity - To Max Reach ###
    Unstabilised Lift Capacity - To Max Height ###
    Unstabilised Lift Capacity - To Max Reach ###
    Stabilised Lift Capacity - To Max Height ###
    Stabilised Lift Capacity - To Max Reach ###
    Fuel Tank ###
    Number Of Boom Sections ###
    Load Centre ###
    Lift Capacity - Fork Maximum ###
    Raise Time - Boom ###
    Extend Time - Boom ###
    Speed - Forward Maximum ###
    Operating Weight ###

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

    Pegasus 50.19 Dieci - Special equipment

    • Diesel particulate filter
    • limited pivotable
    • endles rotation

    RAVAS iForks-32 weight scaling solution for your Dieci Pegasus 50.19

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Dieci Pegasus 50.19 and realise immediate cost savings

    Functions:

    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system

    Benefits:

    Installation within 5 minutes

    Completely wireless with digital calibration

    More information
    X

    What do you think about this machine?


    Compare Dieci Pegasus 50.19 with other models

    No image available

    Dieci Pegasus 50.19

    5t

    18 R 22.5

    500 mm

    Dieci products

    Check out 4 Dieci products here

    More about Dieci