Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Reach Trucks Reach Trucks Jungheinrich Jungheinrich ETV Q25 specifications

    Jungheinrich ETV Q25 Specifications & Technical Data (2002-2017)

    Rate this machine now!

    Nominal load at COG: 2.5t – Total width: 1720mm – Construction height: 2090mm – Standard tyres: P 3 – Centre of gravity: 600mm – Drive system: D

    Technical specs - ETV Q25 Jungheinrich

    Specification

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    • Nominal load at COG 2.5 t
    • Total width 1720 mm
    • Construction height 2090 mm
    • Standard tyres P 3
    • Centre of gravity 600 mm
    • Drive system D
    • Voltage 48 V
    • Traction motor 6 kW
    • Hoist motor 12 kW
    • Weight 4.1 t
    • Battery weight 0.937 t
    • Lifting height 10.7 m
    • Turning radius 1.892 m
    • Travel speed with / without load 11.5 km/h
    • Hoisting with / without load 0.23/0.37 m/s
    • Lowering with load 0.5 m/s

    L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Triplex mast (5,2m) and side shifting device.

    Buy & Rent

    Compare Jungheinrich ETV Q25 with similar Reach Trucks

    Press 1 image

    Jungheinrich ETV Q25

    Nominal load at COG: 2.5 t

    Total width: 1720 mm

    Construction height: 2090 mm

    Standard tyres: P 3

    Press 1 image
    Still FM Q 25

    Nominal load at COG: 2.5 t

    Standard tyres: 2V/1xV

    Press 1 image
    Atlet UHX 200

    Nominal load at COG: 2 t

    Total width: 1397 mm

    Construction height: 4873 mm

    Standard tyres: 2/1

    Press 1 image
    Mitsubishi RBM 20 K

    Nominal load at COG: 2 t

    Total width: 1700 mm

    Construction height: 2495 mm

    Standard tyres: 1x/4

    Press 1 image
    RAYMOND 7530

    Nominal load at COG: 2.041 t

    Sell Jungheinrich ETV Q25

    Reach Trucks appraisal with LECTURA Valuation

    Wether you need to know value of your Jungheinrich ETV Q25 or valuation of your Reach Trucks fleet, LECTURA Valuation will help. Simply fill the machine details and see the values for Reach Trucks in few clicks.

    Valuate right now!
    Data provided by

    Spare parts & Components

    Get spare parts for Jungheinrich ETV Q25 easily from our partners

    Inquire the spare part you need from our partners with a few easy steps and choose the best offer. Wether you are a dealer or an owner, LECTURA can navigate you to the right direction. Order the Reach Trucks spare parts easily today - worldwide.

    RAVAS iForks-32 weight scaling solution for your Jungheinrich ETV Q25

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Jungheinrich ETV Q25 and realise immediate cost savings

    Functions:

    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system

    Benefits:

    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Events & News

    Material Handling News by LECTURA 20.09.2021

    TOBROCO-GIANT expands dealer network
    TOBROCO-GIANT expands dealer network

    The manufacturer TOBROCO-GIANT from the Netherlands is actually changing its structure for sales and support for Austrian customers.

    More industry news Listen to podcast
    X

    What do you think about this machine?

    Jungheinrich products

    Check out 16 Jungheinrich products here

    More about Jungheinrich