Crown RD 5795 S 1.46 E
1.45t
1220 mm
2260 mm
.png)
Weekly overview of interesting news from the heavy machinery industry.
Technical specs - RD 5795 S 1.46 E Crown
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
| Nominal load at COG | 1.45 t |
|---|---|
| Total width | 1220 mm |
| Construction height | 2260 mm |
| Standard tyres | 1x3/4 |
| Centre of gravity | 600 mm |
| Drive system | D |
| Voltage | 36 V |
| Traction motor | 4.8 kW |
| Hoist motor | 21 kW |
| Weight | 3.555 t |
| Battery weight | 1.18 t |
| Lifting height | 11 m |
| Turning radius | 1.976 m |
| Travel speed with / without load | 12/13.3 km/h |
| Hoisting with / without load | 0.52/0.77 m/s |
| Lowering with load | 0.56 m/s |
L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Triplex mast (5,2m) and side shifting device.
RAVAS iForks-32 weight scaling solution for your Crown RD 5795 S 1.46 E
Successful RAVAS scale forks
Fit iForks for your Crown RD 5795 S 1.46 E and realise immediate cost savings
Functions:
Gross/net weighing
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Benefits:
Installation within 5 minutes
Completely wireless with digital calibration
Download data sheets - Crown RD 5795 S 1.46 E
- RD 5795 S 1.46 E Crown Specification for Europe (DE)
- RD 5795 S 1.46 E Crown Specification for Europe (EN)
- RD 5795 S 1.46 E Crown Specification for Europe (ES)
X
What do you think about this machine?
.jpg)
Compare Crown RD 5795 S 1.46 E with other models
Crown products
Check out 14 Crown products here