Crown RD 5795 S 1.45 D
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
|Nominal load at COG||1.45 t|
|Total width||1220 mm|
|Construction height||2260 mm|
|Centre of gravity||600 mm|
|Traction motor||4.8 kW|
|Hoist motor||20.5 kW|
|Battery weight||1.035 t|
|Lifting height||11 m|
|Turning radius||1.912 m|
|Travel speed with / without load||12/13.3 km/h|
|Hoisting with / without load||0.52/0.77 m/s|
|Lowering with load||0.56 m/s|
L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Triplex mast (5,2m) and side shifting device.
Successful RAVAS scale forks
Fit iForks for your Crown RD 5795 S 1.45 D and realise immediate cost savings
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Installation within 5 minutes
Completely wireless with digital calibration
Thank you for your review
Check out 14 Crown products here
Weekly overview of interesting news from heavy machinery industry.