Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Reach Trucks Reach Trucks Crown Crown RD 5725 1.45 D specifications

    Technical specs - RD 5725 1.45 D Crown

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 1.45 t
    Total width 1067 mm
    Construction height 2260 mm
    Standard tyres 1x2/4
    Centre of gravity 600 mm
    Drive system D
    Voltage 36 V
    Traction motor 4.8 kW
    Hoist motor 20.5 kW
    Weight 3.375 t
    Battery weight 1.035 t
    Lifting height 10.16 m
    Turning radius 1.87 m
    Travel speed with / without load 12/13 km/h
    Hoisting with / without load 0.52/0.77 m/s
    Lowering with load 0.56 m/s

    L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Triplex mast (5,2m) and side shifting device.

    RAVAS iForks-32 weight scaling solution for your Crown RD 5725 1.45 D

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Crown RD 5725 1.45 D and realise immediate cost savings

    Functions:

    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system

    Benefits:

    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Download data sheets - Crown RD 5725 1.45 D

    X

    What do you think about this machine?


    Compare Crown RD 5725 1.45 D with other models

    Press 1 image

    Crown RD 5725 1.45 D

    1.45t

    1067 mm

    2260 mm

    Crown products

    Check out 14 Crown products here

    More about Crown