Crown ESR 1060-30
1.4t
2554 mm
1x/2
.png)
Weekly overview of interesting news from the heavy machinery industry.
Technical specs - ESR 1060-30 Crown
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
| Nominal load at COG | 1.4 t |
|---|---|
| Construction height | 2554 mm |
| Standard tyres | 1x/2 |
| Centre of gravity | 600 mm |
| Weight | 2.534 t |
| Battery weight | 0.88 t |
| Lifting height | 5.79 m |
| Turning radius | 1.645 m |
| Travel speed with / without load | 14/14 km/h |
| Hoisting with / without load | 0.80/0.58 m/s |
| Lowering with load | 0.57/0.57 m/s |
| Total width | ### |
| Drive system | ### |
| Voltage | ### |
| Traction motor | ### |
| Hoist motor | ### |
L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Triplex mast (5,2m) and side shifting device.
RAVAS iForks-32 weight scaling solution for your Crown ESR 1060-30
Successful RAVAS scale forks
Fit iForks for your Crown ESR 1060-30 and realise immediate cost savings
Functions:
Gross/net weighing
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Benefits:
Installation within 5 minutes
Completely wireless with digital calibration
Download data sheets - Crown ESR 1060-30
-
Our services
- ModelSpecs
- Spare parts Find parts
- TransportQuota & guide
X
What do you think about this machine?
.jpg)
Compare Crown ESR 1060-30 with other models
-
Our services
- ModelSpecs
- Spare parts Find parts
- TransportQuota & guide
Crown products
Check out 14 Crown products here