BT Reflex RRE 160 HR
1t
1414 mm
2804 mm
.jpg)
Weekly overview of interesting news from heavy machinery industry.
Technical specs - Reflex RRE 160 HR BT
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
| Nominal load at COG | 1 t |
|---|---|
| Total width | 1414 mm |
| Construction height | 2804 mm |
| Standard tyres | V1x/2 |
| Centre of gravity | 600 mm |
| Drive system | D |
| Voltage | 48 V |
| Traction motor | 7.5 kW |
| Hoist motor | 11 kW |
| Weight | 2 t |
| Battery weight | 0,875 t |
| Lifting height | 6 m |
| Turning radius | 1 m |
| Travel speed with / without load | 10/11 km/h |
| Hoisting with / without load | 0,35/0,7 m/s |
| Lowering with load | 0,55/0,55 m/s |
L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Triplex mast (5,2m) and side shifting device.
RAVAS iForks-32 weight scaling solution for your BT Reflex RRE 160 HR
Successful RAVAS scale forks
Fit iForks for your BT Reflex RRE 160 HR and realise immediate cost savings
Functions:
Gross/net weighing
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Benefits:
Installation within 5 minutes
Completely wireless with digital calibration
Download data sheets - BT Reflex RRE 160 HR
X
What do you think about this machine?
.jpg)
Compare BT Reflex RRE 160 HR with other models
BT products
Check out 16 BT products here