JCB TLT25G
2.5t
2xL/2L
500 mm
.png)
Weekly overview of interesting news from the heavy machinery industry.
Technical specs - TLT25G JCB
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
| Nominal load at COG | 2.5 t |
|---|---|
| Standard tyres | 2xL/2L |
| Centre of gravity | 500 mm |
| Transmission type | HY |
| Weight | 4.28 t |
| Max. Reach horizontal | 2.39 m |
| Capacity at full forward reach | 1 t |
| Lifting height | 4.1 m |
| Capacity at full lift hight | 2 t |
| Travel speed with / without load | 20 km/h |
| max. climbing ability | 25 % |
| Engine manuf. | GM |
| Engine type | G 3.0 L 4 |
| Engine power | 43 kW |
| Emission level | Stufe III |
| Hoisting with / without load | ### |
| Lowering with load | ### |
| Engine power | ### |
| Dimension lxwxh | ### |
| Displacement | ### |
| Revolutions at max torque | ### |
| Max. torque | ### |
| No. of cylinders | ### |
| Cylinder bore x stroke | ### |
| Weight | ### |
L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel
RAVAS iForks-32 weight scaling solution for your JCB TLT25G
Successful RAVAS scale forks
Fit iForks for your JCB TLT25G and realise immediate cost savings
Functions:
Gross/net weighing
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Benefits:
Installation within 5 minutes
Completely wireless with digital calibration
X
What do you think about this machine?
.jpg)
Compare JCB TLT25G with other models
.jpg)
JCB products
Check out 26 JCB products here
Visit JCB at
