All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Electric Front Forklift Trucks - explosion protected Electric Front Forklift Trucks - explosion protected Linde Linde E 20 EX PH specifications

    Technical specs - E 20 EX PH Linde

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 2 t
    Standard tyres SE 2x/2
    Total width 1172 mm
    Construction height 2130 mm
    Centre of gravity 500 mm
    Drive system D
    Voltage 48 V
    Traction motor 5+5 kW
    Hoist motor 11 kW
    Weight 3.516 t
    Battery weight 1,12 t
    Lifting height 6.1 m
    Turning radius 1.713 m
    Travel speed with / without load 20 km/h
    Hoisting with / without load 0.5/0.6 m/s
    Lowering with load 0.58/0.5 m/s

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel

    RAVAS iForks-32 weight scaling solution for your Linde E 20 EX PH

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Linde E 20 EX PH and realise immediate cost savings


    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system


    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Download data sheets - Linde E 20 EX PH


    What do you think about this machine?

    Compare Linde E 20 EX PH with other models

    No image available

    Linde E 20 EX PH


    SE 2x/2

    1172 mm

    Linde products

    Check out 21 Linde products here

    More about Linde