DP World Antwerp Gateway has ordered a fleet of 34 Automated Stacking Cranes (Konecranes Gottwald ARMGs) for its container terminal in Antwerp, Belgium.
Technical specs - C 4000 ET Combi-Lift
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
Nominal load at COG | 4 t |
---|---|
Total width | 2300 mm |
Construction height | 2855 mm |
Standard tyres | 3x3 |
Centre of gravity | 600 mm |
Voltage | 80 V |
Traction motor | 2x5 kW |
Hoist motor | 19 kW |
Weight | 6.65 t |
Lifting height | 4.04 m |
Travel speed with / without load | 10 km/h |
Turning radius | 2.31 m |
Drive system | ### |
Battery weight | ### |
Hoisting with / without load | ### |
Lowering with load | ### |
All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel
RAVAS iForks-32 weight scaling solution for your Combi-Lift C 4000 ET

Successful RAVAS scale forks
Fit iForks for your Combi-Lift C 4000 ET and realise immediate cost savings
Functions:
Gross/net weighing
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Benefits:
Installation within 5 minutes
Completely wireless with digital calibration
Download data sheets - Combi-Lift C 4000 ET
- C 4000 ET Combi-Lift Specification for Europe (DE)
- C 4000 ET Combi-Lift Specification for Europe (EN)
What do you think about this machine?
Combi-Lift products
Check out 7 Combi-Lift products here
Material Handling News by LECTURA 19.01.2021
.jpg)