All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Electric forklifts Electric forklifts Nissan Nissan TX 3-15 s specifications

    Nissan TX 3-15 s Specifications & Technical Data (2012-2014)

    Rate this machine now!

    Nominal load at COG: 1.5t – Standard tyres: SE – Total width: 1070mm – Construction height: 2110mm – Centre of gravity: 500mm – Drive system: D

    Technical specs - TX 3-15 s Nissan


    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur.Contact our team with any change suggestion.

    • Nominal load at COG 1.5 t
    • Standard tyres SE
    • Total width 1070 mm
    • Construction height 2110 mm
    • Centre of gravity 500 mm
    • Drive system D
    • Voltage 48 V
    • Traction motor 2x7,1 kW
    • Hoist motor 14,5 kW
    • Weight 3.2 t
    • Battery weight 0,65 t
    • Turning radius 1.42 m
    • Lifting height 4 m
    • Travel speed with / without load 14,5 km/h
    • Hoisting with / without load 0,3/0,5 m/s
    • Lowering with load 0,5/0,55 m/s

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel

    Buy & Rent

    Compare Nissan TX 3-15 s with similar Electric forklifts

    Press 1 image

    Nissan TX 3-15 s

    Nominal load at COG: 1.5 t

    Standard tyres: SE

    Total width: 1070 mm

    Construction height: 2110 mm

    Press 1 image
    Toyota FBM 16

    Nominal load at COG: 1.6 t

    Standard tyres: L 4

    Press 1 image
    Yale ERP 16 ATF

    Nominal load at COG: 1.6 t

    Standard tyres: SE 3

    Press 1 image
    Manitou ME 315

    Nominal load at COG: 1.5 t

    Standard tyres: SE 2x/2

    Total width: 1090 mm

    Construction height: 2040 mm

    Press 1 image
    Atlet Nova TS

    Nominal load at COG: 1.2 t

    Standard tyres: V1+1x/2

    Total width: 870 mm

    Sell Nissan TX 3-15 s

    Sell your second-hand equipment on a free trading platform for dealers and rental companies

    Machinerycash is the quick and easy solution for selling and getting valuations for second-hand earthmoving and materials handling equipment.



    Get a cover price or a direct offer for your equipment within 48 hours

    Cover price


    Receive a direct offer of your equipment within 48 hours

    Direct offer
    Service provided by machinerycash

    Spare parts & Components

    Get spare parts for Nissan TX 3-15 s easily from our partners

    Inquire the spare part you look for from our partners with a few easy steps and choose the best offer. Wether you are a dealer or an owner, LECTURA can point you to the right direction. Order the Electric forklifts spare parts easily today - worldwide.

    RAVAS iForks-32 weight scaling solution for your Nissan TX 3-15 s

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Nissan TX 3-15 s and realise immediate cost savings


    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system


    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Events & News


    What do you think about this machine?

    Nissan products

    Check out 5 Nissan products here

    More about Nissan