All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Electric Forklift Trucks Electric Forklift Trucks Montini Montini MR Zinc 3.5 specifications

    Technical specs - MR Zinc 3.5 Montini

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 3.5 t
    Standard tyres SE 2x/2
    Total width 1205 mm
    Construction height 2350 mm
    Centre of gravity 500 mm
    Drive system D
    Voltage 80 V
    Traction motor 2x8,5 kW
    Hoist motor 19 kW
    Weight 5.56 t
    Battery weight 1,853/2,047 t
    Turning radius 2 m
    Lifting height 3.405 m
    Travel speed with / without load 16 km/h
    Hoisting with / without load 0,3/0,42 m/s
    Lowering with load 0,47/0,3 m/s

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel

    RAVAS iForks-32 weight scaling solution for your Montini MR Zinc 3.5

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Montini MR Zinc 3.5 and realise immediate cost savings


    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system


    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Download data sheets - Montini MR Zinc 3.5


    What do you think about this machine?

    Compare Montini MR Zinc 3.5 with other models

    No image available

    Montini MR Zinc 3.5


    SE 2x/2

    1205 mm

    Montini products

    Check out 2 Montini products here

    More about Montini