Montini MR Zinc 1.7 Compact
1.75t
SE 2x/2
1030 mm
.jpg)
Weekly overview of interesting news from heavy machinery industry.
Technical specs - MR Zinc 1.7 Compact Montini
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
| Nominal load at COG | 1.75 t |
|---|---|
| Standard tyres | SE 2x/2 |
| Total width | 1030 mm |
| Construction height | 2239 mm |
| Centre of gravity | 500 mm |
| Drive system | D |
| Voltage | 48 V |
| Traction motor | 2x3.8 kW |
| Hoist motor | 11 kW |
| Weight | 3.56 t |
| Battery weight | 1,36/1,46 t |
| Turning radius | 1.558 m |
| Lifting height | 3.3 m |
| Travel speed with / without load | 15 km/h |
| Hoisting with / without load | 0,3/0,45 m/s |
| Lowering with load | 0.52/0.5 m/s |
All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel
RAVAS iForks-32 weight scaling solution for your Montini MR Zinc 1.7 Compact
Successful RAVAS scale forks
Fit iForks for your Montini MR Zinc 1.7 Compact and realise immediate cost savings
Functions:
Gross/net weighing
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Benefits:
Installation within 5 minutes
Completely wireless with digital calibration
Download data sheets - Montini MR Zinc 1.7 Compact
X
What do you think about this machine?
.jpg)
Compare Montini MR Zinc 1.7 Compact with other models
.jpg)
Montini products
Check out 2 Montini products here