Montini MR 4.0 CSM
4t
SE 2x/2
1290 mm
Dedication, reliability and a preference for multifunctional tools – all these things are often attributed to Swiss people.
Technical specs - MR 4.0 CSM Montini
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
| Nominal load at COG | 4 t |
|---|---|
| Standard tyres | SE 2x/2 |
| Total width | 1290 mm |
| Construction height | 2368 mm |
| Centre of gravity | 500 mm |
| Drive system | D |
| Voltage | 80 V |
| Traction motor | 2x8,5 kW |
| Hoist motor | 21 kW |
| Weight | 6.61 t |
| Battery weight | 2,180/2,410 t |
| Turning radius | 2.296 m |
| Lifting height | 3.3 m |
| Travel speed with / without load | 16/17 km/h |
| Hoisting with / without load | 0,35/0,45 m/s |
| Lowering with load | 0,48/0,3 m/s |
All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel
RAVAS iForks-32 weight scaling solution for your Montini MR 4.0 CSM
Successful RAVAS scale forks
Fit iForks for your Montini MR 4.0 CSM and realise immediate cost savings
Functions:
Gross/net weighing
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Benefits:
Installation within 5 minutes
Completely wireless with digital calibration
Download data sheets - Montini MR 4.0 CSM
X
What do you think about this machine?
.jpg)
Compare Montini MR 4.0 CSM with other models
Montini products
Check out 2 Montini products here
Material Handling News by LECTURA 20.01.2021
.jpg)
Swiss recycling company Reinhard Recycling AG expands fleet with three more SENNEBOGEN machines