Weekly overview of interesting news from the heavy machinery industry.
Technical specs - MR 3.0 Montini
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
Nominal load at COG | 3 t |
---|---|
Standard tyres | SE 2x/2 |
Total width | 1180 mm |
Construction height | 2350 mm |
Centre of gravity | 500 mm |
Drive system | D |
Voltage | 80 V |
Traction motor | 2x7.5 kW |
Hoist motor | 16.5 kW |
Weight | 5.13 t |
Battery weight | 1,852/2,048 t |
Turning radius | 1.996 m |
Lifting height | 3.405 m |
Travel speed with / without load | 16 km/h |
Hoisting with / without load | 0,32/0,42 m/s |
Lowering with load | 0,47/0,3 m/s |
All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel
RAVAS iForks-32 weight scaling solution for your Montini MR 3.0

Successful RAVAS scale forks
Fit iForks for your Montini MR 3.0 and realise immediate cost savings
Functions:
Gross/net weighing
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Benefits:
Installation within 5 minutes
Completely wireless with digital calibration
What do you think about this machine?
Montini products
Check out 2 Montini products here