All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Electric Forklift Trucks Electric Forklift Trucks Montini Montini MR 2.5 GA specifications

    Technical specs - MR 2.5 GA Montini

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 2.5 t
    Standard tyres SE 2x/2
    Total width 1110 mm
    Construction height 2307 mm
    Centre of gravity 500 mm
    Drive system D
    Voltage 80 V
    Traction motor 2x7.5 kW
    Hoist motor 16.5 kW
    Weight 4.95 t
    Battery weight 1,852/2,048 t
    Turning radius 1.996 m
    Lifting height 3.405 m
    Travel speed with / without load 16 km/h
    Hoisting with / without load 0,39/0,46 m/s
    Lowering with load 0,52/0,5 m/s

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel

    RAVAS iForks-32 weight scaling solution for your Montini MR 2.5 GA

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Montini MR 2.5 GA and realise immediate cost savings


    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system


    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Download data sheets - Montini MR 2.5 GA


    What do you think about this machine?

    Compare Montini MR 2.5 GA with other models

    No image available

    Montini MR 2.5 GA


    SE 2x/2

    1110 mm

    Montini products

    Check out 2 Montini products here

    More about Montini