All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Electric Forklift Trucks Electric Forklift Trucks Montini Montini MR 2.5 Compact.P XL specifications

    Technical specs - MR 2.5 Compact.P XL Montini

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 2.5 t
    Standard tyres CU 2x/2
    Total width 1110 mm
    Construction height 2646 mm
    Centre of gravity 500 mm
    Drive system D
    Voltage 80 V
    Traction motor 2x6.1 kW
    Hoist motor 16.2 kW
    Weight 5.42 t
    Battery weight 1.915/ t
    Turning radius 1.685 m
    Lifting height 6 m
    Travel speed with / without load 16 km/h
    Hoisting with / without load 0.38/0.45 m/s
    Lowering with load 0.57/0.36 m/s

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel

    RAVAS iForks-32 weight scaling solution for your Montini MR 2.5 Compact.P XL

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Montini MR 2.5 Compact.P XL and realise immediate cost savings


    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system


    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    What do you think about this machine?

    Compare Montini MR 2.5 Compact.P XL with other models

    No image available

    Montini MR 2.5 Compact.P XL


    CU 2x/2

    1110 mm

    Montini products

    Check out 2 Montini products here

    More about Montini