All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Electric Forklift Trucks Electric Forklift Trucks Montini Montini MR 2.0 GA CSM specifications

    Technical specs - MR 2.0 GA CSM Montini

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 2 t
    Standard tyres SE 2x/2
    Total width 1132 mm
    Construction height 2125 mm
    Centre of gravity 500 mm
    Drive system D
    Voltage 48 V
    Traction motor 2x3.8 kW
    Hoist motor 11 kW
    Weight 3.55 t
    Battery weight 1,385 t
    Turning radius 1.751 m
    Lifting height 3.3 m
    Travel speed with / without load 15/16 km/h
    Hoisting with / without load 0.37/0.48 m/s
    Lowering with load 0.52/0.5 m/s

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel

    RAVAS iForks-32 weight scaling solution for your Montini MR 2.0 GA CSM

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Montini MR 2.0 GA CSM and realise immediate cost savings


    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system


    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Download data sheets - Montini MR 2.0 GA CSM


    What do you think about this machine?

    Compare Montini MR 2.0 GA CSM with other models

    No image available

    Montini MR 2.0 GA CSM


    SE 2x/2

    1132 mm

    Montini products

    Check out 2 Montini products here

    More about Montini