All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Electric Forklift Trucks Electric Forklift Trucks Jungheinrich Jungheinrich EFG S50 specifications

    Technical specs - EFG S50 Jungheinrich

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 5 t
    Standard tyres SE 2x/2
    Total width 1450 mm
    Construction height 2350 mm
    Centre of gravity 600 mm
    Drive system D
    Voltage 80 V
    Traction motor 18 kW
    Hoist motor 24 kW
    Weight 8.036 t
    Battery weight 2.178 t
    Turning radius 2.68 m
    Lifting height 6 m
    Travel speed with / without load 15/17 km/h
    Hoisting with / without load 0.31/0.45 m/s
    Lowering with load 0.55/0.5 m/s

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel

    RAVAS iForks-32 weight scaling solution for your Jungheinrich EFG S50

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Jungheinrich EFG S50 and realise immediate cost savings


    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system


    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Download data sheets - Jungheinrich EFG S50


    What do you think about this machine?

    Compare Jungheinrich EFG S50 with other models

    Press 1 image

    Jungheinrich EFG S50


    SE 2x/2

    1450 mm

    Jungheinrich products

    Check out 16 Jungheinrich products here

    More about Jungheinrich