All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Electric Forklift Trucks Electric Forklift Trucks Crown Crown SCT 6020 1.3 specifications

    Technical specs - SCT 6020 1.3 Crown

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 1.3 t
    Standard tyres 2x/2/SE
    Total width 1070 mm
    Construction height 1990 mm
    Centre of gravity 500 mm
    Drive system D
    Voltage 48 V
    Traction motor 2x5.5 kW
    Hoist motor 11.2 kW
    Weight 2.528 t
    Battery weight 0.673 t
    Turning radius 1.493 m
    Lifting height 7.49 m
    Travel speed with / without load 16.0/16.0 km/h
    Hoisting with / without load 0.55/0.56 m/s
    Lowering with load 0.5 m/s

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel

    RAVAS iForks-32 weight scaling solution for your Crown SCT 6020 1.3

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Crown SCT 6020 1.3 and realise immediate cost savings


    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system


    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Download data sheets - Crown SCT 6020 1.3


    What do you think about this machine?

    Compare Crown SCT 6020 1.3 with other models

    Press 1 image

    Crown SCT 6020 1.3



    1070 mm

    Crown products

    Check out 14 Crown products here

    More about Crown