A new partnership has been agreed on between LECTURA and Ukrainian company WEST AUTO HUB (WAH). As a result of this cooperation, LECTURA launched a Ukrainian language version of its ultimate buyers’ guide LECTURA Specs in November 2020.
Technical specs - FC 5245 3.0 Crown
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
Nominal load at COG | 3 t |
---|---|
Standard tyres | 2x/2/V |
Total width | 1160 mm |
Construction height | 2120 mm |
Centre of gravity | 500 mm |
Drive system | D |
Voltage | 48 V |
Traction motor | 2x7,9 kW |
Hoist motor | 11.4 kW |
Weight | 4.048 t |
Battery weight | 1.41 t |
Turning radius | 1.975 m |
Lifting height | 6.12 m |
Travel speed with / without load | 17.7/19.7 km/h |
Hoisting with / without load | 0.41/0.58 m/s |
Lowering with load | 0.46 m/s |
All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel
RAVAS iForks-32 weight scaling solution for your Crown FC 5245 3.0

Successful RAVAS scale forks
Fit iForks for your Crown FC 5245 3.0 and realise immediate cost savings
Functions:
Gross/net weighing
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Benefits:
Installation within 5 minutes
Completely wireless with digital calibration
Download data sheets - Crown FC 5245 3.0
- FC 5245 3.0 Crown Specification for Europe (DE)
- FC 5245 3.0 Crown Specification for Europe (EN)
- FC 5245 3.0 Crown Specification for Europe (ES)
What do you think about this machine?
Crown products
Check out 14 Crown products here
Material Handling News by LECTURA 27.01.2021
.png)