All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Electric Forklift Trucks Electric Forklift Trucks Crown Crown FC 5225 2.0 specifications

    Technical specs - FC 5225 2.0 Crown

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 2 t
    Standard tyres 2x/2/V
    Total width 1115 mm
    Construction height 2120 mm
    Centre of gravity 500 mm
    Drive system D
    Voltage 48 V
    Traction motor 2x7,9 kW
    Hoist motor 11.4 kW
    Weight 3.267 t
    Battery weight 1.27 t
    Turning radius 1.83 m
    Lifting height 7.925 m
    Travel speed with / without load 17.7/19.7 km/h
    Hoisting with / without load 0.57/0.58 m/s
    Lowering with load 0.46 m/s

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel

    RAVAS iForks-32 weight scaling solution for your Crown FC 5225 2.0

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Crown FC 5225 2.0 and realise immediate cost savings


    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system


    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Download data sheets - Crown FC 5225 2.0


    What do you think about this machine?

    Compare Crown FC 5225 2.0 with other models

    Press 1 image

    Crown FC 5225 2.0



    1115 mm

    Crown products

    Check out 14 Crown products here

    More about Crown