.jpg)
Weekly overview of interesting news from heavy machinery industry.
Technical specs - C 11512 JD Combi-Lift
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
| Nominal load at COG | 11.5 t |
|---|---|
| Standard tyres | VR 400/55-15 HR 465/55-20 |
| Centre of gravity | 1200 mm |
| Weight | 16.5 t |
| Total width | 3510 mm |
| Construction height | 3450 mm |
| Lifting height | 4.1 m |
| Travel speed with / without load | 15 km/h |
| Turning radius | 3.16 m |
| max. climbing ability | 15 % |
| Engine manuf. | GM |
| Engine type | PSI |
| Engine power | 118 kW |
| Engine power | 160 HP |
| Displacement | 5.7 l |
| Transmission type | ### |
| Hoisting with / without load | ### |
| Lowering with load | ### |
| Dimension lxwxh | ### |
| Revolutions at max torque | ### |
| Max. torque | ### |
| No. of cylinders | ### |
| Cylinder bore x stroke | ### |
| Weight | ### |
| Emission level | ### |
All specifications and prices refer to basic models with standard fork carriage and 2 standard prongs without additional hydraulics. With duplex mast (3,3m up to 10t • 5m > 10t load capacity) L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel
RAVAS iForks-32 weight scaling solution for your Combi-Lift C 11512 JD
Successful RAVAS scale forks
Fit iForks for your Combi-Lift C 11512 JD and realise immediate cost savings
Functions:
Gross/net weighing
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Benefits:
Installation within 5 minutes
Completely wireless with digital calibration
X
What do you think about this machine?
.jpg)
Combi-Lift products
Check out 7 Combi-Lift products here