Toyota 02-8 FDF 30
3t
SE
500 mm
.jpg)
Weekly overview of interesting news from heavy machinery industry.
Technical specs - 02-8 FDF 30 Toyota
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
| Nominal load at COG | 3 t |
|---|---|
| Standard tyres | SE |
| Centre of gravity | 500 mm |
| Transmission type | W |
| Weight | 4.27 t |
| Total width | 1240 mm |
| Construction height | 2170 mm |
| Turning radius | 2.43 m |
| Lifting height | 4.7 m |
| Travel speed with / without load | 17.5/18 km/h |
| Hoisting with / without load | 0.5/0.53 m/s |
| Lowering with load | 0.5 m/s |
| max. climbing ability | 27 % |
| Engine manuf. | Toyota |
| Engine type | 1 DZ-III |
| Engine power | 41 kW |
| Engine power | ### |
| Dimension lxwxh | ### |
| Displacement | ### |
| Revolutions at max torque | ### |
| Max. torque | ### |
| No. of cylinders | ### |
| Cylinder bore x stroke | ### |
| Weight | ### |
| Emission level | ### |
L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)
RAVAS iForks-32 weight scaling solution for your Toyota 02-8 FDF 30
Successful RAVAS scale forks
Fit iForks for your Toyota 02-8 FDF 30 and realise immediate cost savings
Functions:
Gross/net weighing
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Benefits:
Installation within 5 minutes
Completely wireless with digital calibration
Download data sheets - Toyota 02-8 FDF 30
X
What do you think about this machine?
Compare Toyota 02-8 FDF 30 with other models
Toyota products
Check out 12 Toyota products here