Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Diesel Forklifts Diesel Forklifts Komatsu Komatsu FD40ZTU-10 specifications

    Komatsu FD40ZTU-10 Specifications & Technical Data (2021-2021)

    Rate this machine now!

    Nominal load at COG: 3.5t – Standard tyres: 2x/2 – Centre of gravity: 600mm – Transmission type: HY – Weight: 5.735t – Total width: 1350mm

    Technical specs - FD40ZTU-10 Komatsu

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 3.5 t
    Standard tyres 2x/2
    Centre of gravity 600 mm
    Transmission type HY
    Weight 5.735 t
    Total width 1350 mm
    Construction height 2210 mm
    Turning radius 2.58 m
    Lifting height 3 m
    Travel speed with / without load 18/19 km/h
    Hoisting with / without load 0,54/0,56 m/s
    Lowering with load 0.50/0.50 m/s
    max. climbing ability 30 %
    Engine manuf. Komatsu
    Engine type SAA4D95LE-5-A
    Engine power 69 kW
    Engine power 92.5 HP
    Displacement 3.26 l
    Revolutions at max torque 1600 rpm
    Max. torque 321 Nm
    No. of cylinders 4
    Dimension lxwxh ###
    Cylinder bore x stroke ###
    Weight ###
    Emission level ###

    L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

    RAVAS iForks-32 weight scaling solution for your Komatsu FD40ZTU-10

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Komatsu FD40ZTU-10 and realise immediate cost savings

    Functions:

    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system

    Benefits:

    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Download data sheets - Komatsu FD40ZTU-10

    X

    What do you think about this machine?

    Compare Komatsu FD40ZTU-10 with other models

    No image available

    Komatsu FD40ZTU-10

    3.5t

    2x/2

    600 mm

    Komatsu products

    Check out 26 Komatsu products here

    More about Komatsu

    Visit Komatsu at