All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Diesel Forklifts Diesel Forklifts Jungheinrich Jungheinrich DFG 425s specifications

    Jungheinrich DFG 425s Specifications & Technical Data (2021-2021)

    Rate this machine now!

    Nominal load at COG: 2.5t – Standard tyres: SE 2x/2 – Centre of gravity: 500mm – Weight: 3.965t – Total width: 1180mm – Construction height: 2321mm

    Technical specs - DFG 425s Jungheinrich

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 2.5 t
    Standard tyres SE 2x/2
    Centre of gravity 500 mm
    Weight 3.965 t
    Total width 1180 mm
    Construction height 2321 mm
    Turning radius 2.3 m
    Lifting height 3.3 m
    Travel speed with / without load 21,5/21,5 km/h
    Hoisting with / without load 0,56/0,56 m/s
    Lowering with load 0,56/0,56 m/s
    max. climbing ability 31 %
    Engine manuf. Kubota
    Engine type V2403-CR-T
    Engine power 43.2 kW
    Displacement 2.434 l
    No. of cylinders 4
    Transmission type ###
    Engine power ###
    Dimension lxwxh ###
    Revolutions at max torque ###
    Max. torque ###
    Cylinder bore x stroke ###
    Weight ###
    Emission level ###

    L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

    RAVAS iForks-32 weight scaling solution for your Jungheinrich DFG 425s

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Jungheinrich DFG 425s and realise immediate cost savings


    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system


    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    What do you think about this machine?

    Compare Jungheinrich DFG 425s with other models

    No image available

    Jungheinrich DFG 425s


    SE 2x/2

    500 mm

    Jungheinrich products

    Check out 16 Jungheinrich products here

    More about Jungheinrich